ATEX CERTIFIED TEMPERATURE SENSORS FOR EX ZONES

INTRINSICALLY SAFE TEMPERATURE SENSORS FOR EX ZONES

WHEREVER THERE IS A RISK OF EXPLOSION – MINING, GAS INDUSTRY, PETROCHEMISTRY

INTRINSICALLY SAFE THERMOMETER

Characteristics:Intrinsically safe temperature sensors

Temperature sensor: Pt 100, Ni 1000
Measurement range: -40°C to 250°C
Output without transmitter: Pt 100, Ni 1000
Output with analog transducer: 4 – 20 mA
Powered by current loop: yes
Digital output: 5 – 15 Hz
Design: chemical industry, gas industry, mines, submersible, for outdoor use
Mounting/thread: M 20 x 1.5; G 1/2 ½ or other on request
Shank diameter: 6, 8, 10 mm
Material: Food grade or other stainless steel
Output connector: DIN 43650 connector, cable gland, cable
Ex execution classification: II 1G Ex ia IIC T6-T4 Ga, I M1 Ex ia I Ma
Certificate: FTZU 02 ATEX 0285, FTZU 10 ATEX 0151

INTRINSICALLY SAFE TI TEMPERATURE SENSORS

are designed to measure temperature in wells located in tanks, pipelines, containers, air, etc. The measured medium may be a flammable liquid or an explosive gas. The temperature is converted into an electrical signal using resistive elements – Ni 1000 or Pt 100 sensors. Intrinsically safe temperature sensors can be equipped with electronics in the sensor body, which transfers the sensor voltage to a unified electrical signal of 4 – 20 mA or 5 – 15 Hz. The power supply for the intrinsically safe temperature sensor is provided from a 4 – 20 mA current loop (two-wire) or from an intrinsically safe power supply with a digital output (four-wire).

Characteristics:

– version with or without cable in the head (output – current loop or PT100)

– increased immunity to interference (EMC)

– increased mechanical and vibration resistance

Technical parameters:

Version with cable in the head:

Temperature sensor – Ni 6180 (DIN 43760, IEC 751) or Pt100

Power supply – from 14 V to 36 V

Error tolerance – ± 0.1% Non-linearity – ± 0.2%

Influence of supply voltage on output current – < 0.002%/V

Housing – IP65

Material – steel Thread – M20×1.5 (with reduction – M27×2)

Operating temperature – from -30 to +70 °C Unom – 28 V

Version without cable:

Temperature sensors – simple or double Pt100

Tolerance class – “B” (can be ordered in class “A”)

Housing – IP65

Material – steel Thread – M20×1.5 (with reduction – M27×2)

Ambient temperature – from -20 to +150°C

Intrinsically safe TI immersion temperature sensor
Technical parameters:

Version with cable in the head:

Temperature sensor – Ni 6180 (DIN 43760, IEC 751) or Pt100

Power supply – from 14 V to 36 V Error tolerance – ± 0.1%

Non-linearity – ± 0.2%

Influence of supply voltage on output current – < 0.002%/V

Housing – IP65

Material – steel Thread – M20×1.5 (with reduction – M27×2)

Operating temperature – from -30 to +70 °C Unom – 28 V

Version without cable:

Temperature sensors – simple or double Pt100

Tolerance class – “B” (can be ordered in class “A”)

Housing – IP65

Material – steel Thread – M20×1.5 (with reduction – M27×2)

Ambient temperature – from -20 to +150°C

Poland